US robotics Starterkit with USR 5463 based on a atheros SoC system
1. Photos
boots with kamikaze 7.09 openwrt-brcm-2.4-squashfs.trx
dmesg:
Rebooting system ...
Flash initialized
SDRAM initialized
Cache initialized
Copy program from 0xbfc00000 to 0x80520000, length 0x0000cf04 bytes ... done
Jump to SDRAM 0x80520cb4 [0x10000008, 0x00000000, 0x00000000]
Clear BSS section ... done
Stack: 0x8053ed20
Heap: 0x8053ed30
=========================================================================
Wireless Gateway WG4005G-LF-U5 Loader 0.01 build Jan 26 2006 11:44:33
Arcadyan Technology Corporation
=========================================================================
Copying boot params.....DONE
cpuFreq=240000000 sysFreq=60000000 cntFreq=120000000
Press any key to enter command mode ...
Checking Valid Image in Flash... Passed.
failed(4)
Try to find image for running...
Valid Code found in the Flash
.......................................................................................................................e
Uncompressed size = 2071296
I am going to run the Code image from 80001000
firmware startup...
Stack: 0x807ab9d0
Heap: 0x807ab9e0
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: feed_watchdog is called?
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: setGpio is called??
##### _ftext = 0x80001000
##### _fdata = 0x801C0570
##### __bss_start = 0x801FAB00
##### end = 0x8079B9D0
##### Backup Data from 0x801C0570 to 0x807AB9D0 length=0003A590
[CGI] Web SDRAM area is from 0XBFC40000H
install_exception
Installing TLB Refill exception handler from 8000A0D0 to 80000000, size=184
Installing General exception handler from 8000A188 to 80000180, size=216
Installing Interrupt exception handler from 8000A260 to 80000200, size=160
misc_int_init
mips_int_enable : 0x00000400
Connect the AHB interrupt
sysBoardDataInit
Init the GPIOs !!!
Enable arbitration for SOC devices !!!
cpuFreq=184000000 sysFreq=40000000 cntFreq=92000000
AR531X_TIMER=00061A6E
AR531X_RELOAD=00061A80
AR531X_IMR=00000028
mips_cp0_status=10000401
mips_cp0_cause=30800000
[INIT] MTinitialize ..
Runtime code version: V0.04
System startup...
[INIT] MTmeminit ..
[INIT] check COLOR 0 ..
[INIT] soho initialize COLOR1 : 448512
[INIT] soho initialize COLOR2 : 382976
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: feed_watchdog is called?
Flash Found. It is 2MB Flash....
Set flash memory layout to Runcode version: V0.04
Runcode date: Apr 28 2006 23:56:15
Bootcode version: 0.01
Serial number: 1WB6I43H2570
Hardware version: 01
sizeof(struct III_Config_t) is 91144
!!! Invalid wireless channel range 0 ~ 0
!!! Use default value 1 ~ 13
default route: 0.0.0.0
BufferInit:
BUF_HDR_SZ=48 BUF_ALIGN_SZ=8 BUFFER_OFFSET=112
BUF_BUFSZ0=384 BUF_BUFSZ1=1776
NUM_OF_B0=0 NUM_OF_B1=600
BUF_POOL0_SZ=0 BUF_POOL1_SZ=1094400
sizeof(BUFFER0)=432,sizeof(BUFFER1)=1824
*BUF0=0x805c3574 *BUF1=0x804b8264
Altgn *BUF0=0x805c3580 *BUF1=0x804b8270
End at BUF0:0x805c3580, BUF1:0x805c3570
buffer0 pointer init OK!
buffer1 pointer init OK!
time = 08/01/2003, 00:00:00
Interface 0 ip = 127.0.0.1
ar531xmac_init: ifno=1, initstr=UNIT=0 VLAN=1
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/hardware/ar5312/ar531xbsp.c:sysEnetInit is called
ae531xEndLoad: loading device ...
ae531xEndLoad: unit=0, pDmaBuf=0xa0362c78, dmaBufSize=8976, txDescCount=192, rxDescCount=256, clCount=512
ae531xEndLoad: System param: mac=b0500000, dma=b0501000, ivec=4, ilev=1000
ae531xEndLoad: Flash ea = 00:14:c1:35:fe:19
ae0 qt = 1, buf begin = 80000000, buf end = 80000000
ae0 qt = 1, drsc begin = a0362c80, desc end = a0363b6c
Tx Queue b=0xa0362c80, e=0xa0363b6c, c=0xa0362c80, s@c=0x 0
ae0 qt = 2, buf begin = 804b82e2, buf end = 80529bc2
ae0 qt = 2, drsc begin = a0363b80, desc end = a0364f6c
Rx Queue b=0xa0363b80, e=0xa0364f6c, c=0xa0363b80, s@c=0x80000000
ae531xMemInit: Memory setup complete.
Found PHY enet0 port0: model 0x18 revision 0x0
Found PHY enet0 port1: model 0x18 revision 0x0
Found PHY enet0 port2: model 0x18 revision 0x0
Found PHY enet0 port3: model 0x18 revision 0x0
Found PHY enet0 port4: model 0x18 revision 0x0
Port 0, Negogiation timeout
eth0: Phy Status=7849
eth0: Phy Status=7849
eth0: Phy Status=7849
eth0: Phy Status=7849
eth0: Phy Status=7849
ip_VLANInit> WAN port
ip_VLANInit> LAN port
ip_VLANInit> LAN port
ip_VLANInit> LAN port
ip_VLANInit> LAN port
Smart Router : 189
ae0 Phy Setup Failed
Please check the ethernet cable on port 0!
eth0: duplex 0, link 0
ae_SetMacFromPhy: enet0 as half duplex, 10Mbps
ae0: setting TXDP=0xa0362c80 RXDP=0xa0363b80
ae0 Verify MAC address 35C11400 000019FE
sb = 00 14 C1 35 FE 19
ae531xRxFilterConfig: MacControl = 1084000C
ae531xEndLoad: Done loading, pDrvCtrl=80362A70 txQ=80362A9C rxQ=80362AB0
ar531xmac_init: enet0 set to VLAN mode
ar531xmac_init: enet0 interface 1 registered to VLAN 1
DmaStatus = 0x 0
DmaBusMode = 0x 2084
DmaRxBase = 0x 363b80
DmaTxBase = 0x 362c80
DmaControl = 0x 200000
DmaIntr = 0x 0
MacControl = 0x1084000c
MacAddrHi = 0x 19fe
MacAddrLo = 0x35c11400
MacVlan1 = 0x 8100
MacVlan2 = 0x 0
Rx Queue b=0xa0363b80, e=0xa0364f6c, c=0xa0363b80, s@c=0x80000000
Current Rx buffer = 0x 0
Tx Queue b=0xa0362c80, e=0xa0363b6c, c=0xa0362c80, s@c=0x 0
Current Tx buffer = 0x 0
time = 08/01/2003, 00:00:00
ae531xRxFilterConfig: MacControl = 1084000C
Interface 1 ip = 192.168.2.1
ae531xRxFilterConfig: MacControl = 1084000C
ether_init : Set WAN MTU = 1500
ar531xmac_init: ifno=2, initstr=UNIT=0 VLAN=2
ar531xmac_init: driver already loaded, number of instances is 2
ar531xmac_init: enet0 set to VLAN mode
ar531xmac_init: enet0 interface 2 registered to VLAN 2
DmaStatus = 0x 0
DmaBusMode = 0x 2084
DmaRxBase = 0x 363b80
DmaTxBase = 0x 362c80
DmaControl = 0x 200000
DmaIntr = 0x 0
MacControl = 0x1084000c
MacAddrHi = 0x 19fe
MacAddrLo = 0x35c11400
MacVlan1 = 0x 8100
MacVlan2 = 0x 0
Rx Queue b=0xa0363b80, e=0xa0364f6c, c=0xa0363b80, s@c=0x80000000
Current Rx buffer = 0x 0
Tx Queue b=0xa0362c80, e=0xa0363b6c, c=0xa0362c80, s@c=0x 0
Current Tx buffer = 0x 0
time = 08/01/2003, 00:00:00
iput_IpLinkUp(ifno=2)> ifp->add_default_route:1
Re-Init NAT data structure
Init NAT data structure
iput_IpLinkUp(ifno=2): set ddns_update to 1
Interface 2 ip = 0.0.0.0
[HWLAN] ifno=3 irno=7 port=0x00000000
[HWLAN] semBCreate return 1 8034c0c8, count 1
[HWLAN] pRadio->abolt = 00000000
[HWLAN] pRadio->abolt = 00000040
[HWLAN] gSetting.BasicRate=f
apInit: Initialize Access Point.
[HWLAN] ar5hwcCreatePhy : ifno:3 pdevInfo=803d50ac, devno=1
[HWLAN] devno 1 pdevInfo 803d50ac
[HWLAN] Base address = b0000000, irq 3
Attach AR5212 0x13 0x803d50ac
[HWLAN] DOMAIN 00008210
[HWLAN] Set HWLAN MAC as LAN MAC ..
[HWLAN] MAC Address=00-14-C1=35-FE-1B
[HWLAN] wlan1 revisions: mac 11.0 phy 4.8 analog 8.6 eeprom 5.3
[HWLAN] phwChannel 2437, channelFlags 00005400
[HWLAN] size of ATHEROS_DESC hardware part 32
[HWLAN] CACHE_LINE_SIZE 16, AR_DESC_SIZE 128
[HWLAN] AR_HEADER_SIZE 96, AR_BUF_SIZE 1696numDescriptors = 704
[HWLAN] wlan1: pDmaBuf=A01FB760
[HWLAN] pMemBuf a01fb760 pdevInfo->pDmaBuf a01fb760
[HWLAN] semBCreate return 2 8034c0d8, count 1
[HWLAN] ar5hwcQueueCreate: semaphore id 8034c0d8
[HWLAN] semBCreate return 3 8034c0e8, count 1
[HWLAN] ar5hwcQueueCreate: semaphore id 8034c0e8
[HWLAN] semBCreate return 4 8034c0f8, count 1
[HWLAN] ar5hwcQueueCreate: semaphore id 8034c0f8
[HWLAN] semBCreate return 5 8034c108, count 1
[HWLAN] ar5hwcQueueCreate: semaphore id 8034c108
[HWLAN] pMemBuf a0217760, pdevInfo->pDmaBuf + pdevInfo->dmaBufSize a0231f80
[HWLAN] muxDevLoad is called for vportNum 10000, loadfn 8008ff7c, vportStr 16: 0: 1
[HWLAN] semBCreate return 6 8034c118, count 1
[HWLAN] semBCreate return 7 8034c128, count 1
ar5212Reset: maxCalCount 10
[HWLAN] ioctl CMD=0xb
mips_int_connect: ivec 3 ar5hwcInt 80073f4c pdevInfo 803d50ac
mips_int_enable : 0x00000C00
[HWLAN] bridgePortAdd : vp, 10000
[HWLAN] bridgePortAdd (base BSS) succeeded for vp1
[HWLAN] muxDevLoad is called for vportNum 10001, loadfn 8008ff7c, vportStr 17: 0: 2
XR info 5
[HWLAN] semBCreate return 8 8034c138, count 1
[HWLAN] ioctl CMD=0xb
[HWLAN] bridgePortAdd : vp, 10001
[HWLAN] bridgePortAdd (XR BSS) succeeded for vp1
[HWLAN] semBCreate return 9 8034c148, count 0
[HWLAN] semBCreate return 10 8034c158, count 0
[HWLAN] semBCreate return 11 8034c168, count 1
[HWLAN] semBCreate return 12 8034c178, count 1
[HWLAN] semBCreate return 13 8034c188, count 0
[HWLAN] semBCreate return 14 8034c198, count 1
[HWLAN] semBCreate return 15 8034c1a8, count 1
[HWLAN] semBCreate return 16 8034c1b8, count 0
[HWLAN] semBCreate return 17 8034c1c8, count 1
[HWLAN] semBCreate return 18 8034c1d8, count 1
[HWLAN] semBCreate return 19 8034c1e8, count 0
wlan1 added STA: 00:14:c1:35:fe:1b (840)
[HWLAN] ifno=3 after call apInit() : .... bg 1 , a 0 ....
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: Hwlan_light_init is call
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 3 ip = 192.168.2.1
[HWLAN] hwlan_ioctl() ..
[HWLAN] ifno=5 irno=7 port=0x00000000
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: Hwlan_light_init is call
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 5 ip = 192.168.2.1
[HWLAN] hwlan_ioctl() ..
[HWLAN] ifno=6 irno=7 port=0x00000000
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: Hwlan_light_init is call
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 6 ip = 192.168.2.1
[HWLAN] hwlan_ioctl() ..
[HWLAN] ifno=7 irno=7 port=0x00000000
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: Hwlan_light_init is call
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 7 ip = 192.168.2.1
[HWLAN] hwlan_ioctl() ..
[HWLAN] ifno=8 irno=7 port=0x00000000
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: Hwlan_light_init is call
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 8 ip = 192.168.2.1
[HWLAN] hwlan_ioctl() ..
[HWLAN] ifno=9 irno=7 port=0x00000000
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: Hwlan_light_init is call
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 9 ip = 192.168.2.1
[HWLAN] hwlan_ioctl() ..
ruleCheck()> Group: 0, Error: Useless rule index will be truncated
ruleCheck()> Group: 1, Error: Useless rule index will be truncated
ruleCheck()> Group: 2, Error: Useless rule index will be truncated
ruleCheck()> Group: 3, Error: Useless rule index will be truncated
ruleCheck()> Group: 4, Error: Useless rule index will be truncated
ruleCheck()> Group: 5, Error: Useless rule index will be truncated
ruleCheck()> Classify Rule: 1, Error: Protocol Field
ruleCheck()> Classify Rule: 2, Error: Protocol Field
ruleCheck()> Classify Rule: 3, Error: Protocol Field
ruleCheck()> Classify Rule: 4, Error: Protocol Field
ruleCheck()> Classify Rule: 5, Error: Protocol Field
ruleCheck()> Classify Rule: 6, Error: Protocol Field
ruleCheck()> Classify Rule: 7, Error: Protocol Field
ruleCheck()> Classify Rule: 8, Error: Protocol Field
ruleCheck()> Classify Rule: 9, Error: Protocol Field
ruleCheck()> Classify Rule: 10, Error: Protocol Field
ruleCheck()> Classify Rule: 11, Error: Protocol Field
ruleCheck()> Classify Rule: 12, Error: Protocol Field
ruleCheck()> Classify Rule: 13, Error: Protocol Field
ruleCheck()> Classify Rule: 14, Error: Protocol Field
ruleCheck()> Classify Rule: 15, Error: Protocol Field
ruleCheck()> Classify Rule: 16, Error: Protocol Field
ruleCheck()> Classify Rule: 17, Error: Protocol Field
ruleCheck()> Classify Rule: 18, Error: Protocol Field
ruleCheck()> Classify Rule: 19, Error: Protocol Field
ruleCheck()> Classify Rule: 20, Error: Protocol Field
ruleCheck()> Classify Rule: 21, Error: Protocol Field
ruleCheck()> Classify Rule: 22, Error: Protocol Field
ruleCheck()> Classify Rule: 23, Error: Protocol Field
ruleCheck()> Classify Rule: 24, Error: Protocol Field
ruleCheck()> Classify Rule: 25, Error: Protocol Field
ruleCheck()> Classify Rule: 26, Error: Protocol Field
ruleCheck()> Classify Rule: 27, Error: Protocol Field
ruleCheck()> Classify Rule: 28, Error: Protocol Field
ruleCheck()> Classify Rule: 29, Error: Protocol Field
ruleCheck()> Classify Rule: 30, Error: Protocol Field
ruleCheck()> Classify Rule: 31, Error: Protocol Field
ruleCheck()> Classify Rule: 32, Error: Protocol Field
reqCBACBuf()> init match pool, Have: 10
Memory Address: 0x807911e0 ~ 0x80791314
reqCBACBuf()> init timeGap pool, Have: 100
Memory Address: 0x80791314 ~ 0x80791af8
reqCBACBuf()> init sameHost pool, Have: 20
Memory Address: 0x80791af8 ~ 0x80791d98
[setClsfyEnable] clsfy_func=0
CBAC rule pool initialized !!
ae0 Tx Down, dropping mBlk=0x80580190
ae0 Tx Down, dropping mBlk=0x8057FA70
ae0 Tx Down, dropping mBlk=0x80580190
ae0 Tx Down, dropping mBlk=0x80580190
ae0 Tx Down, dropping mBlk=0x80580190
ae0 Tx Down, dropping mBlk=0x80580190
ae0 Tx Down, dropping mBlk=0x80580190
ae0 Tx Down, dropping mBlk=0x80580190
Init NAT data structure
RUNTASK id=2 if_task if0...
RUNTASK id=3 if_task if1...
RUNTASK id=4 if_task if2...
RUNTASK id=5 if_task if3...
RUNTASK id=6 if_task if5...
RUNTASK id=7 if_task if6...
RUNTASK id=8 if_task if7...
RUNTASK id=9 if_task if8...
RUNTASK id=10 if_task if9...
RUNTASK id=11 timer_task...
RUNTASK id=12 conn_mgr...
RUNTASK id=13 main_8021x...
year=104,mon=11,day=18C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: fe
randomize ..
RUNTASK id=14 period_task...
RUNTASK id=15 dhcp_daemon...
RUNTASK id=16 dhcp_clt...on interface 2
RUNTASK id=17 pptp_callmgr...
httpd: listen at 192.168.2.1:80
HTTPD TIMER_RESOURCE:5, FS_RESOURCE:6
RUNTASK httpd...
RUNTASK id=20 dnsproxy...
RUNTASK id=21 rip...
RUNTASK id=22 ripout...
RUNTASK id=23 dhcpd_mgmt_task...
UPnP is disabled
C:/TTF2004AP51/GW_AP_Ath_AP51/ttf2004/source/firmware/project/usr/wg4005g-lf-u5/ar5315/gpio.c: feed_watchdog is called?
Starting Multitask...
MTstart2() begin ...
[HWLAN] Ready
This Device is GW