User Tools

Site Tools

This wiki is read only and for archival purposes only. >>>>>>>>>> Please use the new OpenWrt wiki at <<<<<<<<<<


The MCP2200 is a USB-to-UART serial converter which enables USB connectivity in application that have a UART interface. The device reduces external components by integrating the USB termination resistors. The MCP2200 also has 256-bytes of integrated user EEPROM. The MCP2200 has eight general purpose input / output pins. Four of the pins have alternate functions to indicate USB and communication status.

Chaos Calmer 15.05

Serial port

Only proper module is needed.

opkg install kmod-usb-acm

After plugging in is device created.

General purpose input / output pins

I was unable to get in it work. /dev/hiddev* is missing.

Additional info

Where to buy

doc/mcp2200.txt · Last modified: 2015/12/22 14:02 by tmomas