User Tools

Site Tools


doc:openwrt_system_default_features

Openwrt system default features

Any freshly installed "vanilla" OpenWrt Image, will start with these defaults:

  • The internal interface lan and the wireless interface/interfaces wlan0 / wlan1 are bridged together to br-lan
  • wifi is disabled
  • the IP address of the internal interface/bridge of the OpenWrt-device is 192.168.1.1/24
  • dnsmasq is running; it allocates IP addresses in the range of 192.168.1.100 to .250 on the internal interface to connected hosts
  • dropbear does not accept connections (releases up to Chaos Calmer 15.05 and trunk builds before r46809)
  • telnet daemon is running on standard port 23 (releases up to Chaos Calmer 15.05 and trunk builds before r46809)
  • ssh daemon is running on standard port 22 (trunk builds after r46809)
OpenWrt will keep booting into this state until you set a password:
doc/openwrt_system_default_features.txt · Last modified: 2015/12/22 14:11 by tmomas