User Tools

Site Tools


doc:uci:network

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
doc:uci:network [2016/07/29 14:35]
richbhanover hncp is now a full RFC7788
doc:uci:network [2017/11/23 21:29] (current)
fossterer Updated broken link
Line 117: Line 117:
 | ''​bridge_empty''​ | boolean | no | ''​0''​ | Only valid for type "​bridge",​ enables creating empty bridges | | ''​bridge_empty''​ | boolean | no | ''​0''​ | Only valid for type "​bridge",​ enables creating empty bridges |
 | ''​igmp_snooping''​ | boolean | no | ''​1''​ | Only valid for type "​bridge",​ sets the multicast_snooping kernel setting for a bridge | | ''​igmp_snooping''​ | boolean | no | ''​1''​ | Only valid for type "​bridge",​ sets the multicast_snooping kernel setting for a bridge |
 +| ''​multicast_to_unicast''​ | boolean | no | ''​1''​ | Only valid for type "​bridge",​ sets isolate to 1 for wireless interfaces on the bridge |
 | ''​macaddr''​ | mac address | no | //(none)// | Override MAC address of this interface | | ''​macaddr''​ | mac address | no | //(none)// | Override MAC address of this interface |
 | ''​mtu''​ | number | no | //(none)// | Override the default MTU on this interface | | ''​mtu''​ | number | no | //(none)// | Override the default MTU on this interface |
Line 138: Line 139:
 | ''​ip6ifaceid''​ | ipv6 suffix | no | ::1 | Allowed values: '​eui64',​ '​random',​ fixed value like '::​1:​2'​. \\ When IPv6 prefix (like '​a:​b:​c:​d::'​) is received from a delegating server, use the suffix (like '::​1'​) to form the IPv6 address ('​a:​b:​c:​d::​1'​) for this interface. Useful with several routers in LAN. The option was introduced by [[http://​git.openwrt.org/?​p=project/​netifd.git;​a=commitdiff;​h=0b0e5e2fc5b065092644a5c4717c0a03a9098dcf;​hp=e9d2014a478807c7fac0581bb4a145901a3f23b4|this commit]] to netifd in Jan 2015. | | ''​ip6ifaceid''​ | ipv6 suffix | no | ::1 | Allowed values: '​eui64',​ '​random',​ fixed value like '::​1:​2'​. \\ When IPv6 prefix (like '​a:​b:​c:​d::'​) is received from a delegating server, use the suffix (like '::​1'​) to form the IPv6 address ('​a:​b:​c:​d::​1'​) for this interface. Useful with several routers in LAN. The option was introduced by [[http://​git.openwrt.org/?​p=project/​netifd.git;​a=commitdiff;​h=0b0e5e2fc5b065092644a5c4717c0a03a9098dcf;​hp=e9d2014a478807c7fac0581bb4a145901a3f23b4|this commit]] to netifd in Jan 2015. |
 | ''​ip6gw''​ | ipv6 address | no | //(none)// | Assign given IPv6 default gateway to this interface | | ''​ip6gw''​ | ipv6 address | no | //(none)// | Assign given IPv6 default gateway to this interface |
-| ''​ip6assign''​ | prefix length | no | //(none)// | Delegate a [[[[network6#​downstream.configuration.for.lan-interfaces|prefix of given length]] to this interface (Barrier Breaker and later only) |+| ''​ip6assign''​ | prefix length | no | //(none)// | Delegate a [[[[network6#​downstream_configuration_for_lan-interfaces|prefix of given length]] to this interface (Barrier Breaker and later only) |
 | ''​ip6hint''​ | prefix hint (hex) | no | //(none)// | [[network6#​downstream.configuration.for.lan-interfaces|Hint the subprefix-ID]] that should be delegated as hexadecimal number (Barrier Breaker and later only) |  | ''​ip6hint''​ | prefix hint (hex) | no | //(none)// | [[network6#​downstream.configuration.for.lan-interfaces|Hint the subprefix-ID]] that should be delegated as hexadecimal number (Barrier Breaker and later only) | 
 | ''​ip6prefix''​ | ipv6 prefix | no | //(none)// | IPv6 prefix routed here for use on other interfaces (Barrier Breaker and later only) | | ''​ip6prefix''​ | ipv6 prefix | no | //(none)// | IPv6 prefix routed here for use on other interfaces (Barrier Breaker and later only) |
Line 160: Line 161:
 | ''​customroutes''​ | string | no | //(none)// | Space-separated list of additional routes to insert via the received gateway | | ''​customroutes''​ | string | no | //(none)// | Space-separated list of additional routes to insert via the received gateway |
 | ''​metric''​ | integer | no | ''​0''​ | Specifies the route metric to use for both default route and custom routes | | ''​metric''​ | integer | no | ''​0''​ | Specifies the route metric to use for both default route and custom routes |
 +| ''​classlessroute''​ | boolean | no | ''​1''​ | Whether to request the "​classless route" option (DHCP option 121) — //available since LEDE r2001// |
 | ''​reqopts''​ | string | no | //(none)// | Space-separated list of additional DHCP options to request from the server | | ''​reqopts''​ | string | no | //(none)// | Space-separated list of additional DHCP options to request from the server |
 | ''​sendopts''​ | string | no | //(none)// | Space-separated list of additional DHCP options to send to the server. Syntax: ''​option:​value''​ where ''​option''​ is either an integer code or a symbolic name such as ''​hostname''​. | | ''​sendopts''​ | string | no | //(none)// | Space-separated list of additional DHCP options to send to the server. Syntax: ''​option:​value''​ where ''​option''​ is either an integer code or a symbolic name such as ''​hostname''​. |
Line 252: Line 254:
 | ''​ac''​ | string | no | //(none)// | Specifies the Access Concentrator to connect to. If unset, ''​pppd''​ uses the first discovered one | | ''​ac''​ | string | no | //(none)// | Specifies the Access Concentrator to connect to. If unset, ''​pppd''​ uses the first discovered one |
 | ''​service''​ | string | no | //(none)// | Specifies the Service Name to connect to, If unset, ''​pppd''​ uses the first discovered one | | ''​service''​ | string | no | //(none)// | Specifies the Service Name to connect to, If unset, ''​pppd''​ uses the first discovered one |
 +| ''​host_uniq''​ | string | no | //(none)// | Populate the Host-Uniq tag with this value, required by some ISPs |
 | ''​connect''​ | file path | no | //(none)// | Path to custom PPP connect script | | ''​connect''​ | file path | no | //(none)// | Path to custom PPP connect script |
 | ''​disconnect''​ | file path | no | //(none)// | Path to custom PPP disconnect script | | ''​disconnect''​ | file path | no | //(none)// | Path to custom PPP disconnect script |
Line 350: Line 353:
 === Protocol "​hnet"​ (Self-managing home network (HNCP)) === === Protocol "​hnet"​ (Self-managing home network (HNCP)) ===
  
-:!: The package ''​hnet-full''​ must be installed to use hnet.+:!: The package ''​hnet-full''​ must be installed to use hnet. We recommend you install ''​ipset''​ before installing ''​hnet-full''​
 :!: See https://​tools.ietf.org/​html/​rfc7788 for details. :!: See https://​tools.ietf.org/​html/​rfc7788 for details.
  
doc/uci/network.1469795749.txt.bz2 · Last modified: 2016/07/29 14:35 by richbhanover