User Tools

Site Tools


meta:template_device_old

Device Detail Template This page is a shared resource for everyone. Please do not make changes for your device here! Instead, create your own page in the wiki for your device. To do this:

  • Click the pencil on the right ("Edit this page"),
  • Copy all the content from the page (with the white background)
  • Type toh:BRAND:MODEL into the search field (with the magnifying glass) and press Return. (This moves to a new page, without changing the template.)
  • On that new page, click the pencil with a "+" ("Create this page")
  • Paste in the text and modify it for your router.
  • Your router information is on a new page http://wiki.openwrt.org/toh/BRAND/MODEL

Brand Model

Write a short, relevant description of the device. Include a technical overview, but avoid marketing buzzwords/useless stuff. Two to four sentences is about right.

Note: Change "Brand" and "Model" in the heading above with this information:

  • Brand is company that sells or manufacture or distributes the device
  • Model is the name at the label/sticker the manufacturer puts on the device to differentiate itself from other models
  • Example: Netgear MBRN3000

Supported Versions

Version/Model Launch Date S/N OpenWrt Version Supported Model Specific Notes
v1 2006-07 - - -
v1.1 2008-12 - - -
v2 2011-01 - - -

NOTE: Anything not included in model specific notes, or where a short comment couldn't be included on the notes.

OEM source code available at: (add URL)

Hardware Highlights

SoC Ram Flash Network USB Serial JTag
EXAMPLE IXP425@666MHz 36MiB 18MiB 6 x 1 Yes Yes ?

Or a more detailed alternative:

Ver CPU Ram Flash Network Wireless USB Serial JTag Wiki FCC
v1 EXAMPLE Atheros AR7161 rev 2 680MHz 64MiB 8MiB 1 WAN + 4x LAN (GBit) AR9220 [an 2x2:2] + AR9223 [bgn 2x2:2] Yes Yes Yes

Manufacturer's site: (add URL)

Forum: https://forum.openwrt.org/viewtopic.php?id=???

Keep the articles modular

Please include only model specific information, omit bla,bla and put everything generic into separate articles
generic.overview if you have no time to write certain stuff link to this
basic.config should lead the way, do not explain this again
DO NOT provide a complete howto here! Instead groom the general HowTos.

Installation

  1. »»»»here»»»»Latest OpenWrt release««««here«««« DO NOT PROVIDE OWN LINKS to http://downloads.openwrt.org/

Flash Layout

Please check out the article Flash.Layout. It contains an example and a couple of explanations.

OEM easy installation

FIXME The instructions below are for Broadcom devices and only serve as an example. Don't leave them in place if they do not apply to a particular device!

This section deals with how you install OpenWrt from a device freshly opened. Plus the steps required such as reset to factory defaults if the device has already been configured

Note: Reset router to factory defaults if it has been previously configured.

OEM installation using the TFTP method

Specific values you need

Bootloader tftp server IPv4 address FILL-IN
Bootloader MAC address (special) FILL-IN
Firmware tftp image Latest OpenWrt release (NOTE: Name must contain "tftp")
TFTP Transfer Window FILL-IN seconds
TFTP Window Start approximately FILL-IN seconds after power on
TFTP Client Required IP Address FILL-IN

Upgrading OpenWrt

generic.sysupgrade

If you have already installed OpenWrt and like to reflash for e.g. upgrading to a new OpenWrt version you can upgrade using the mtd command line tool. It is important that you put the firmware image into the ramdisk (/tmp) before you start flashing.

LuCI Web Upgrade Process

Terminal Upgrade Process

  • Login as root via SSH on 192.168.1.1
  • Use the following commands to upgrade.

cd /tmp/
wget http://http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
sysupgrade /tmp/xxx.abc

  • If sysupgrade does not support this router, use the following commands.

cd /tmp/
wget http://http://downloads.openwrt.org/snapshots/trunk/XXX/xxx.abc
mtd write /tmp/xxx.abc linux && reboot

Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

Interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi 192.168.1.1/24
vlan0 (eth0.0) LAN ports (1 to 4) None
vlan1 (eth0.1) WAN port DHCP
wl0 WiFi Disabled

Switch Ports (for VLANs)

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) 4
LAN 1 3
LAN 2 2
LAN 3 1
LAN 4 0

Failsafe mode

Buttons

hardware.button on howto use and configure the hardware button(s).

The Linksys WRT54GL has two buttons. They are Reset and Secure Easy Setup. Here, we merely name the buttons, so we can use them in the above Howto:

BUTTON Event
EXAMPLE Reset reset
EXAMPLE Secure Easy Setup ses

Hardware

Info

Instruction set: MIPS / ARM / PowerPC / SPARC / Ubicom32 / x86 /AVR32 / ETRAX CRIS / …
Vendor: Qualcomm Atheros / Lantiq / MediaTek / Broadcom / Ikanos / Marvell / Ingenic Semiconductor / Freescale Semiconductor / Cavium
Bootloader: U-Boot / RedBoot / CFE / …
System-On-Chip: QCA9558-AT4A Rev 2
CPU @Frq MIPS 24Kc V7.4 @400MHz / MIPS 34Kc V x.y @540MHz / MIPS 74Kc Vers. ?.? @720MHz
Flash size: 8192 KiB
Flash Chip: ST 25P64V6P
RAM size: 32 MiB
RAM Chip:
Wireless No1: SoC-integrated: QCA9558-AT4A w/ 3x3 MIMO for 2.4GHz 802.11b/g/n
Wireless No2: distinct Chip: AR9580-AR1A w/ 3x3 MIMO for 5GHz 802.11a/n/ac
Switch: RealTek RTL8366RB (Gigabit, VLAN)
Modem: none / xDSL / DOCSIS / Mobile Wireless/Cellular network
USB: Yes 1 x 2.0 / 3.0
PSU: 12V DC 2.5A / Netgear P030WB120B FIXME
Serial: Yes
JTAG: Yes

Photos

Model Number

Front:
Insert photo of front of the casing

Back:
Insert photo of back of the casing

Opening the case

Note: This will void your warranty!

  • To remove the cover do a/b/c

Main PCB:
Insert photo of PCB

Serial

port.serial general information about the serial port, serial port cable, etc.

How to connect to the Serial Port of this specific device:
Photo of PCB with markings

JTAG

port.jtag general information about the JTAG port, JTAG cable, etc.

How to connect to the JTAG Port of this specific device:
Photo of PCB with markings

Debricking

Bootloader Mods

Currently none.

Hardware mods

Currently none.

Bootlogs

OEM bootlog

COPY HERE THE BOOTLOG WITH THE ORIGINAL FIRMWARE


OpenWrt bootlog

COPY HERE THE BOOTLOG ONCE OPENWRT IS INSTALLED AND RUNNING


Notes

Tags

meta/template_device_old.txt · Last modified: 2015/12/30 11:47 by tmomas