User Tools

Site Tools


toh:belkin:f9k1115v2

Belkin F9K1115 v2 (AC 1750 DB)

Dual-Band AC+ Gigabit router

Hardwareinfo @wikidevi: Belkin F9K1115 v2

Supported Versions

Version/Model Launch Date OpenWrt Version Supported Download Links
v2 2014-05 15.05.1 Chaos Calmer openwrt-15.05-ar71xx-generic-f9k1115v2-squashfs-factory.bin (can be installed from original firmware's web UI)
openwrt-15.05-ar71xx-generic-f9k1115v2-squashfs-sysupgrade.bin (sysupgrade image)

Hardware Highlights

Version CPU Ram Flash Network Wireless USB Serial JTag Wiki FCC
v2 Qualcomm Atheros QCA9558 128MiB 16MiB 1 WAN + 4x LAN (GBit) QCA9558 [bgn 3x3:3] + QCA9880-2R4E [an+ac 3x3:3] 1x3.0 1x2.0 Yes Yes here K7SF9K1115V2

Installation

OEM easy installation

To install simply use the stock GUI to upload and install OpenWrt. Remember to use a factory.img image.

OpenWrt Configuration

Interfaces

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi 192.168.1.1/24
eth0 WAN port DHCP
eth1 LAN ports bridge
wlan0 WiFi 2.4 GHz Disabled
wlan1 WiFi 5 GHz Disabled

USB

USB 3.0 devices appear broken, but USB 2.0 devices do not appear to have issues.
USB 3.0 seems to work fine on CHAOS CALMER (15.05, r46767), please create a ticket if it isn't for you:

[576379.960000] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[576379.980000] usb-storage 4-1:1.0: USB Mass Storage device detected
[576379.990000] scsi host0: usb-storage 4-1:1.0
[576380.990000] scsi 0:0:0:0: Direct-Access     Corsair  Voyager 3.0      1.00 PQ: 0 ANSI: 5
[576381.000000] sd 0:0:0:0: [sda] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
[576381.000000] sd 0:0:0:0: [sda] Write Protect is off
[576381.010000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[576381.010000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[576381.020000]  sda: sda1
[576381.030000] sd 0:0:0:0: [sda] Attached SCSI removable disk

802.11ac 5Ghz WiFi channels

With 80Mhz Bandwidth all the channel in between the ones below fall back to the previous freq. Beware some of the channels don't work at all,in my tests with 3 different devices I only managed to make channel 36 and 44 work with 15.05.

Channels:

  36 - Best
  44 - Works
  52 - Busted
  60 - Busted
  64 - Busted
  100 - Busted
  104 - Busted
  108 - Busted
  112 - Busted
  116 - Busted 

Hardware

Instruction set: MIPS
Vendor: Qualcomm Atheros
Bootloader: U-Boot
System-On-Chip: QCA9558-AT4A
CPU/Speed MIPS 74Kc Vers. 5.0 720 MHz
Flash-Chip: Macronix - currently unknown
Flash size: 16 MiB
RAM-Chip: 2x Winbond W9751G6KB-25 DDR2
RAM size: 128 MiB
Wireless1: SoC: QCA9558-AT4A w/ 3x3 MIMO for 2.4Ghz
Wireless2: Chip: QCA9880-2R4E w/ 3x3 MIMO for 5Ghz
Switch: QCA8337-AL3C
USB: 2 (1x USB 3.0, 1x USB 2.0)
Serial: yes
JTAG: yes

photos

click here to see photos on how to open the case

Serial Port

Pinouts beginning from the square pad: vcc, rx, gnd, tx

115200 8N1

OpenWrt Boot Log

U-Boot 1.1.4 (Jan 27 2014 - 11:33:05) ap135 - Scorpion 1.0DRAM: sri Scorpion 1.0 ath_ddr_initial_config(200): (32bit) ddr2 init tap = 0x00000003 Tap (low, high) = (0x4, 0x1f) Tap values = (0x11, 0x11, 0x11, 0x11) 128 MB Top of RAM usable for U-Boot at: 88000000 Reserving 232k for U-Boot at: 87fc4000 Reserving 192k for malloc() at: 87f94000 Reserving 44 Bytes for Board Info at: 87f93fd4 Reserving 36 Bytes for Global Data at: 87f93fb0 Reserving 128k for boot params() at: 87f73fb0 Stack Pointer at: 87f73f98 Now running in RAM - U-Boot at: 87fc4000 Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18 flash size 16MB, sector count = 256 Flash: 16 MB In: serial Out: serial Err: serial Net: ath_gmac_enet_initialize... athrs_sgmii_res_cal: cal value = 0xe No valid address in Flash. Using fixed address No valid address in Flash. Using fixed address ath_gmac_enet_initialize: reset mask:c02200 Scorpion ----> S17 PHY * Vlan config... s17 phy0 register value 0x00004140 TEST: FINAL REG VAL after TX Calibration - 0x4a000000 TEST: FINAL XMII VAL after RX Calibration - 0x5a000000 TEST: FINAL ETH_CFG VAL after RX Calibration - 0x00000001 athrs17_reg_init: complete : cfg1 0x80000000 cfg2 0x7335 eth0: 00:03:7f:09:0b:ad eth0 up athrs17_reg_init_wan done SGMII in forced mode athr_gmac_sgmii_setup SGMII done : cfg1 0x800c0000 cfg2 0x7214 eth1: 00:03:7f:09:0b:ad eth1 up eth0, eth1 Setting 0x18116290 to 0x458a214f Hit any key to stop autoboot: 0 ## Booting image at 9fe70000 ... Image Name: MIPS OpenWrt Linux-3.18.23 Created: 2016-02-02 11:31:30 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1176718 Bytes = 1.1 MB Load Address: 80060000 Entry Point: 80060000 Verifying Checksum at 0x9fe70040 ...OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80060000) ... ## Giving linux memsize in bytes, 134217728 Starting kernel ... [ 0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 18:39:35 CET 2016 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x07ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x07ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff] [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: board=F9K1115V2 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 125788K/131072K available (2586K kernel code, 128K rwdata, 540K rodata, 256K init, 193K bss, 5284K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:200.000MHz, Ref:40.000MHz [ 0.000000] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048) [ 0.060000] pid_max: default: 32768 minimum: 301 [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070000] NET: Registered protocol family 16 [ 0.080000] MIPS: machine is Belkin AC1750DB [ 0.520000] registering PCI controller with io_map_base unset [ 0.520000] registering PCI controller with io_map_base unset [ 0.530000] PCI host bridge to bus 0000:00 [ 0.530000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff] [ 0.540000] pci_bus 0000:00: root bus resource [io 0x0000] [ 0.540000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.550000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit] [ 0.550000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10200000-0x1020ffff pref] [ 0.560000] PCI host bridge to bus 0000:01 [ 0.560000] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff] [ 0.570000] pci_bus 0000:01: root bus resource [io 0x0001] [ 0.570000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] [ 0.580000] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x12007fff 64bit] [ 0.580000] pci 0000:00:00.0: using irq 40 for pin 1 [ 0.590000] pci 0000:01:00.0: using irq 41 for pin 1 [ 0.590000] Switched to clocksource MIPS [ 0.600000] NET: Registered protocol family 2 [ 0.600000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.600000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.610000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.610000] TCP: reno registered [ 0.620000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.620000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.630000] NET: Registered protocol family 1 [ 0.630000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.650000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.650000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.670000] msgmni has been set to 245 [ 0.680000] io scheduler noop registered [ 0.680000] io scheduler deadline registered (default) [ 0.680000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.720000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A [ 0.720000] console [ttyS0] enabled [ 0.720000] console [ttyS0] enabled [ 0.730000] bootconsole [early0] disabled [ 0.730000] bootconsole [early0] disabled [ 0.740000] m25p80 spi0.0: found w25q128, expected m25p80 [ 0.750000] m25p80 spi0.0: w25q128 (16384 Kbytes) [ 0.750000] 8 cmdlinepart partitions found on MTD device spi0.0 [ 0.760000] Creating 8 MTD partitions on "spi0.0": [ 0.770000] 0x000000000000-0x000000040000 : "u-boot" [ 0.770000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.780000] 0x000000050000-0x000000e70000 : "rootfs" [ 0.780000] mtd: device 2 (rootfs) set to be root filesystem [ 0.790000] 1 squashfs-split partitions found on MTD device rootfs [ 0.790000] 0x0000002d0000-0x000000e70000 : "rootfs_data" [ 0.800000] 0x000000e70000-0x000000fd0000 : "kernel" [ 0.810000] 0x000000fd0000-0x000000fe0000 : "nvram" [ 0.810000] 0x000000fe0000-0x000000ff0000 : "envram" [ 0.820000] 0x000000ff0000-0x000001000000 : "art" [ 0.820000] 0x000000050000-0x000000fd0000 : "firmware" [ 0.840000] switch0: Atheros AR8337 rev. 2 switch registered on ag71xx-mdio.0 [ 0.930000] libphy: ag71xx_mdio: probed [ 1.530000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316] [ 1.540000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 2.130000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII [ 2.130000] TCP: cubic registered [ 2.140000] NET: Registered protocol family 17 [ 2.140000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.150000] Bridge firewalling registered [ 2.160000] 8021q: 802.1Q VLAN Support v1.8 [ 2.170000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 2.180000] Freeing unused kernel memory: 256K (80390000 - 803d0000) [ 3.220000] init: Console is alive [ 3.230000] init: - watchdog - [ 4.570000] usbcore: registered new interface driver usbfs [ 4.570000] usbcore: registered new interface driver hub [ 4.580000] usbcore: registered new device driver usb [ 4.590000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.590000] ehci-platform: EHCI generic platform driver [ 4.600000] ehci-platform ehci-platform.0: EHCI Host Controller [ 4.610000] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1 [ 4.620000] ehci-platform ehci-platform.0: TX-TX IDP fix enabled [ 4.620000] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000 [ 4.650000] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00 [ 4.650000] hub 1-0:1.0: USB hub found [ 4.660000] hub 1-0:1.0: 1 port detected [ 4.660000] ehci-platform ehci-platform.1: EHCI Host Controller [ 4.670000] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2 [ 4.680000] ehci-platform ehci-platform.1: TX-TX IDP fix enabled [ 4.680000] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000 [ 4.710000] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00 [ 4.710000] hub 2-0:1.0: USB hub found [ 4.720000] hub 2-0:1.0: 1 port detected [ 4.730000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002) [ 4.730000] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 4.740000] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 4.750000] hub 3-0:1.0: USB hub found [ 4.750000] hub 3-0:1.0: 2 ports detected [ 4.750000] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 4.760000] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4 [ 4.770000] hub 4-0:1.0: USB hub found [ 4.770000] hub 4-0:1.0: 2 ports detected [ 5.270000] init: - preinit - [ 6.150000] random: procd urandom read with 9 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 7.720000] eth0: link up (1000Mbps/Full duplex) [ 9.400000] jffs2: notice: (398) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 9.420000] mount_root: switching to jffs2 overlay [ 9.450000] eth0: link down [ 9.460000] procd: - early - [ 9.460000] procd: - watchdog - [ 10.200000] procd: - ubus - [ 11.220000] procd: - init - Please press Enter to activate this console. [ 11.780000] NET: Registered protocol family 10 [ 11.790000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.800000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 11.810000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 11.840000] cfg80211: Calling CRDA to update world regulatory domain [ 11.870000] cfg80211: World regulatory domain updated: [ 11.870000] cfg80211: DFS Master region: unset [ 11.870000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.880000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.890000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.900000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.910000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 11.920000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.930000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.940000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.950000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 12.000000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) [ 12.000000] ath10k_pci 0000:00:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0 [ 12.220000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2 [ 12.230000] ath10k_pci 0000:00:00.0: Falling back to user helper [ 12.300000] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 13.620000] ath10k_pci 0000:00:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2.4.45 api 4 htt 2.1 wmi 5 cal otp max_sta 128 [ 13.630000] ath10k_pci 0000:00:00.0: debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 [ 13.740000] cfg80211: Calling CRDA for country: US [ 13.740000] cfg80211: Regulatory domain changed to country: US [ 13.750000] cfg80211: DFS Master region: FCC [ 13.750000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 13.760000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 13.770000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 13.780000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 13.790000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) [ 13.800000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 13.810000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 13.850000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.860000] nf_conntrack version 0.5.0 (1969 buckets, 7876 max) [ 13.940000] xt_time: kernel timezone is -0000 [ 13.960000] PPP generic driver version 2.4.2 [ 13.970000] NET: Registered protocol family 24 [ 14.000000] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47 [ 21.330000] eth1: link up (1000Mbps/Full duplex) [ 21.350000] device eth1 entered promiscuous mode [ 21.350000] br-lan: port 1(eth1) entered forwarding state [ 21.360000] br-lan: port 1(eth1) entered forwarding state [ 21.370000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.940000] eth0: link up (1000Mbps/Full duplex) [ 22.940000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.360000] br-lan: port 1(eth1) entered forwarding state [ 24.940000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up BusyBox v1.23.2 (2016-01-02 18:01:44 CET) built-in shell (ash) _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- CHAOS CALMER (15.05.1, r48532) ----------------------------------------------------- * 1 1/2 oz Gin Shake with a glassful * 1/4 oz Triple Sec of broken ice and pour * 3/4 oz Lime Juice unstrained into a goblet. * 1 1/2 oz Orange Juice * 1 tsp. Grenadine Syrup ----------------------------------------------------- root@OpenWrt:/#


Tags

toh/belkin/f9k1115v2.txt · Last modified: 2016/05/19 10:50 by killgufo