User Tools

Site Tools


toh:foundry:ironpoint-200

Foundry Networks Ironpoint 200

The Ironpoint 200 is a professional Dual-Wifi Router. OpenWrt is not supported yet but might be possible.

Hardware

Info

Architecture: PowerPC
Vendor: Foundry Networks
Bootloader: VxWorks
System-On-Chip: Freescale MPC8241@200MHz (just a guess based upon the bootloader output)
Flash-Chip: Intel TE28F640J3C-120 64 * 1 MBit MLC Flash
Flash size: 8192 KiB
RAM: 32 MiB
Wireless: 1x Atheros AR5212 2.4ghz 802.11bg, 1x Atheros AR5212 5Ghz 802.11a
Ethernet: 1x Auto-sensing 10/100BASE-T PoE Port
Serial: Yes
JTAG: unknown

Photos

Model Number

Front:

Photo of front of the casing

Back:

Photo of back of the casing

Opening the case

Note: This will void your warranty!

  • To remove the cover do a/b/c

Main PCB

Photo of PCB

Serial

This device provides a RS-232 port. Baud rate is 9600.

Bootlogs

OEM bootlog

SDRAM PROBE... 32MB BUS TEST... OK CPU: Motorola PowerPC 8241/8245 Version: 5.4 BSP version: 1.3 Bootcode version: 3.0.4 User reserved memory: 0x10000 Creation date: May 17 2005, 14:12:22 Press any key to stop auto-boot... 1 auto-booting... bootLoad: Entering... boot device : fs unit number : 0 processor number : 0 file name : /fl/foundry-img.bin inet on ethernet (e) : 192.168.1.10 host inet (h) : 192.168.1.1 gateway inet (g) : 192.168.1.1 user (u) : admin ftp password (pw) : admin flags (f) : 0x0 Auto Flash-Detect : 8M Product Name Detect: Flash Mode (1) bootLoad: Found file /fl/foundry-img.bin! bootLoad: Size of file is 1930184 Successfully inflated file Starting at 0x20000... ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:47 ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:38 ar0x1300 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:47 ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:39 ar0x1301 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:47 ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:3a ar0x1302 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:47 ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:3b ar0x1303 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:af ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:3c ar0x0200 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:af ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:3d ar0x0201 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:af ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:3e ar0x0202 loaded ar5212GetMacAddr: EEPROM MAC 00:12:cf:xx:xx:af ar5212GetMacAddr: Using system MAC 00:0c:db:xx:xx:3f ar0x0203 loaded Attaching interface lo0...done Adding 11723 symbols for standalone. Auto Flash-Detect : 8M Product Name Detect: Flash Mode (1) Attached TCP/IP interface to dp unit 0 Attached TCP/IP interface to ar unit 0x0200 Attached TCP/IP interface to ar unit 0x0201 Attached TCP/IP interface to ar unit 0x0202 Attached TCP/IP interface to ar unit 0x0203 Attached TCP/IP interface to ar unit 0x1300 Attached TCP/IP interface to ar unit 0x1301 Attached TCP/IP interface to ar unit 0x1302 Attached TCP/IP interface to ar unit 0x1303 Num of nLoopsNoContention = 6042290 wTmr Init Crash dump installed, crash memory is at 1ff0000 ADC Enabled Access Point! Warning!! If ADC is manually overridden, AP will lose its configuration ADC-Override-Login: admin ADC-Override-Password: Deleted file: /fl/syscfg Deleted file: /fl/syscfg_bak Ready Username: admin Password: Password: Foundry AP#


OpenWrt bootlog

INSERT OPENWRT BOOTLOG HERE


Notes

Tags

toh/foundry/ironpoint-200.txt · Last modified: 2015/12/14 20:24 by tmomas