User Tools

Site Tools


toh:hwdata:huawei:huawei_hg655d

Techdata: Huawei HG655d

Usage

  • IMPORTANT : Edit this page only via the LEFT edit button below the box
  • After editing, please enter a short summary of your edit:
    • Which field has been changed? (e.g. Ethernet 100M ports)
    • What have you done? (e.g. added / updated / deleted / …)
    • Why has it been changed? / What is your datasource? (acc. devicepage / wikidevi / forum …)
    • Example summary: Ethernet 100M ports updated according wikidevi
  • For adding new dropdown values, Contact an OpenWrt wiki admin (tmomas)
  • For conventions / allowed values, see below
  • For general usage help, see Dataentry template background
  • Searching for pure technical facts? See table below.
  • Searching for installation instructions, bootlogs, other info? See link to Device Page below.

Dataentry

Device Type:
WiFi Router
Brand:
Huawei
Model:
HG655d
Availability:
¿
Supported Since Rev:
https://dev.openwrt.org/changeset/45708
Supported Since Rel:
15.05
Supported Current Rel:
15.05
Unsupported:
xDSL modem
Platform:
Broadcom BCM6368
Target:
brcm63xx
Instruction Set:
MIPS32
Bootloader:
CFE
CPU MHz:
2x 400
Flash MB:
8
RAM MB:
64
Ethernet 100M ports:
4
Ethernet GBit ports:
-
Switch:
integrated
Modem:
xDSL
VLAN:
Yes
WLAN Hardware:
Ralink RT3062F (onboard)
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
Detachable Antennas:
-
USB ports:
1x 2.0
Serial:
Yes
JTAG:
Yes
LED count:
11
Button count:
3
Device Page:
hg655d
Forum Topic URL:
https://forum.openwrt.org/viewtopic.php?id=50207
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/chaos_calmer/15.05/brcm63xx/smp/openwrt-15.05-brcm63xx-smp-HG655b-squashfs-cfe.bin
Comments:
bootloader needs replacing; HG655b image is also valid for HG655d, but the HG655d rejects to flash it -> JTAG cable is required to replace the CFE bootloader.

Conventions for dataentry values

General nomenclature

Details

Conventions per characteristic

Details

toh/hwdata/huawei/huawei_hg655d.txt · Last modified: 2016/04/03 04:21 by tmomas