User Tools

Site Tools


toh:pcduino:pcduino8

pcDuino 8 / Arches

The board is more or less a copycat of the Merrii A80 Optimus board, with the difference that this one has NAND, instead of Optimus's eMMC. The board also goes by the alias of "Arches", above the original PCDuino 8 name.

WARNING: the PcDuino8-Uno and the PcDuino8-STB are H8-based boards, which is not supported yet.

Hardware highlights

Model Ports
pcDuino8 2x USB, 1x 10/100/1000 ethernet, MMC, 8GB NAND, HDMI, sound

Availability

The board is available from various vendors, including the manufacturer itself, see here for pcDuino v3.

Further details on the board: http://linux-sunxi.org/Pcduino8_A80_Board

Serial

You can use your usual serial levelshifter. Pinout is:

{GPIO pins}

{ETHERNET}
       GND  GND  VCC RX TX
        o   o   o   o   o 

If in doubt, refer to the Merrii A80 board (yes, the difference between the Merrii and the Linksprite board is the eMMC/NAND, and the white colouring of the board :P )

Status

Installation process

Please refer to soc.allwinner.sunxi.

dmesg

TBD


Tags

toh/pcduino/pcduino8.txt · Last modified: 2017/02/26 11:28 by Jalakas