User Tools

Site Tools


toh:soekris:net6501

Soekris net6501

This is a relatively expensive/powerful general purpose x86 device that can function as a router, firewall, etc. Vendor has an info page and a wiki.

Supported Versions

Work in progress

forum post

target: add new target for Soekris net6501 embedded x86 platform

[PATCH/x86_generic] Add Soekris net6501 device drivers (Intel Atom board)

Boots up from SATA with a custom-compiled Attitude Adjustment (12.09) kernel. Kernel needs SATA AHCI support compiled in to boot from SATA. Correct ethernet driver is e1000e (can be a module package).

Hardware Highlights

The CPU is a 32-bit x86 Intel Atom. There is an upgradable built-in BIOS, an external serial port (DB9), LEDs and temperature sensors, a management (watchdog) microcontroller, and an "extra" FPGA connected to GPIO pins.

The device has 4x gigabit ethernet ports connected to an Intel switch chip. There is no wireless connectivity by default: it can be added via the internal miniPCIe slot, the internal PCIe slot, or USB. It does not ship with any permanent disk space by default: storage can be added via internal SATA ports, an mSATA/miniPCIe slot, or USB ports (the bootloader can be configured to load from any of these devices).

Model CPU Speed RAM Size
net6501-30 600MHz 512MB
net6501-50 1GHz 1GB
net6501-70 1.5GHz 2GB
CPU Ethernet USB Serial JTag
Intel Atom E6xx w/ EG20T companion 4 x GigE (Intel 82574L) Yes, multiple 2.0 Yes, multiple ?

Installation

Upgrading OpenWrt

As of Attitude Adjustment 12.09, x86-based images can be upgraded using sysupgrade. Use a regular "combined" .img file (squashfs confirmed from command-line, ext4 maybe?, luci maybe?).

See generic generic.sysupgrade directions.

Bootlogs

OpenWrt bootlog

(below is partially sanitized)

[ 0.000000] Linux version 3.3.8 (user@host) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #8 Sat Oct 13 23:52:36 CEST 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable) [ 0.000000] BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffe0000 (usable) [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ffe0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fe100] fe100 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 4096 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000 [ 0.000000] ACPI Error: A valid RSDP was not found (20120111/tbxfroot-219) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffe0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x0003ffe0 [ 0.000000] On node 0 totalpages: 261995 [ 0.000000] free_area_init_node: node 0, pgdat c12f7f20, node_mem_map f6ffd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3947 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34514 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: Soekris [ 0.000000] MPTABLE: Product ID: net6501 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 1 [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259947 [ 0.000000] Kernel command line: block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs rootwait console=ttyS0,38400n8 noinitrd reboot=bios [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffe0) [ 0.000000] Memory: 1035400k/1048448k available (2442k kernel code, 12580k reserved, 614k data, 212k init, 139144k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc12fd000 - 0xc1332000 ( 212 kB) [ 0.000000] .data : 0xc1262b02 - 0xc12fc4c0 ( 614 kB) [ 0.000000] .text : 0xc1000000 - 0xc1262b02 (2442 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 999.979 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.95 BogoMIPS (lpj=9999790) [ 0.038340] pid_max: default: 32768 minimum: 301 [ 0.040156] Mount-cache hash table entries: 512 [ 0.050354] using mwait in idle threads. [ 0.060029] CPU: Genuine Intel(R) CPU @ 1.00GHz stepping 01 [ 0.083773] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver. [ 0.110015] ... version: 3 [ 0.120009] ... bit width: 40 [ 0.130009] ... generic registers: 2 [ 0.140010] ... value mask: 000000ffffffffff [ 0.150010] ... max period: 000000007fffffff [ 0.160009] ... fixed-purpose events: 3 [ 0.170009] ... event mask: 0000000700000003 [ 0.180205] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.190476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.420676] NET: Registered protocol family 16 [ 0.431811] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=13 [ 0.440010] PCI: Using configuration type 1 for base access [ 0.461349] bio: create slab <bio-0> at 0 [ 0.470287] ACPI: Interpreter disabled. [ 0.481009] SCSI subsystem initialized [ 0.490390] libata version 3.00 loaded. [ 0.490931] PCI: Probing PCI hardware [ 0.500010] PCI: Probing PCI hardware (bus 00) [ 0.500022] PCI: root bus 00: using default resources [ 0.500230] PCI host bridge to bus 0000:00 [ 0.510016] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.520011] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.530036] pci 0000:00:00.0: [8086:4114] type 0 class 0x000600 [ 0.530140] pci 0000:00:01.0: [8086:8183] type 0 class 0x000600 [ 0.530319] pci 0000:00:17.0: [8086:8184] type 1 class 0x000604 [ 0.530479] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold [ 0.530544] pci 0000:00:18.0: [8086:8185] type 1 class 0x000604 [ 0.530701] pci 0000:00:18.0: PME# supported from D0 D3hot D3cold [ 0.530772] pci 0000:00:19.0: [8086:8180] type 1 class 0x000604 [ 0.530929] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.530993] pci 0000:00:1a.0: [8086:8181] type 1 class 0x000604 [ 0.531149] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.531215] pci 0000:00:1f.0: [8086:8186] type 0 class 0x000601 [ 0.531488] pci 0000:01:00.0: [8086:8800] type 1 class 0x000604 [ 0.531572] pci 0000:01:00.0: reg 38: [mem 0x00000000-0x0000ffff pref] [ 0.531683] pci 0000:01:00.0: supports D1 [ 0.531697] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.531738] pci 0000:00:17.0: PCI bridge to [bus 01-02] [ 0.540018] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff] [ 0.540038] pci 0000:00:17.0: bridge window [mem 0xa0000000-0xa0ffffff] [ 0.540181] pci 0000:02:00.0: [8086:8801] type 0 class 0x00ff00 [ 0.540266] pci 0000:02:00.0: reg 14: [mem 0xa0000000-0xa00007ff] [ 0.540390] pci 0000:02:00.0: reg 30: [mem 0x98000000-0x9801ffff pref] [ 0.540567] pci 0000:02:00.1: [8086:8802] type 0 class 0x000200 [ 0.540631] pci 0000:02:00.1: reg 10: [io 0x1000-0x101f] [ 0.540669] pci 0000:02:00.1: reg 14: [mem 0xa0000800-0xa00009ff] [ 0.540891] pci 0000:02:00.1: PME# supported from D0 [ 0.540971] pci 0000:02:00.2: [8086:8803] type 0 class 0x00ff00 [ 0.541057] pci 0000:02:00.2: reg 14: [mem 0xa0000a00-0xa0000a3f] [ 0.541278] pci 0000:02:00.2: PME# supported from D0 [ 0.541377] pci 0000:02:02.0: [8086:8804] type 0 class 0x000c03 [ 0.541442] pci 0000:02:02.0: reg 10: [mem 0xa0000b00-0xa0000bff] [ 0.541686] pci 0000:02:02.0: PME# supported from D0 D3hot [ 0.541771] pci 0000:02:02.1: [8086:8805] type 0 class 0x000c03 [ 0.541836] pci 0000:02:02.1: reg 10: [mem 0xa0000c00-0xa0000cff] [ 0.550102] pci 0000:02:02.1: PME# supported from D0 D3hot [ 0.550183] pci 0000:02:02.2: [8086:8806] type 0 class 0x000c03 [ 0.550248] pci 0000:02:02.2: reg 10: [mem 0xa0000d00-0xa0000dff] [ 0.550492] pci 0000:02:02.2: PME# supported from D0 D3hot [ 0.550577] pci 0000:02:02.3: [8086:8807] type 0 class 0x000c03 [ 0.550648] pci 0000:02:02.3: reg 10: [mem 0xa0000e00-0xa0000eff] [ 0.550909] pci 0000:02:02.3: PME# supported from D0 D3hot [ 0.550994] pci 0000:02:02.4: [8086:8808] type 0 class 0x000c03 [ 0.551080] pci 0000:02:02.4: reg 14: [mem 0xa0002000-0xa0003fff] [ 0.551301] pci 0000:02:02.4: PME# supported from D0 [ 0.551395] pci 0000:02:04.0: [8086:8809] type 0 class 0x000805 [ 0.551459] pci 0000:02:04.0: reg 10: [mem 0xa0004000-0xa00041ff] [ 0.551761] pci 0000:02:04.1: [8086:880a] type 0 class 0x000805 [ 0.551826] pci 0000:02:04.1: reg 10: [mem 0xa0004200-0xa00043ff] [ 0.552156] pci 0000:02:06.0: [8086:880b] type 0 class 0x000106 [ 0.552313] pci 0000:02:06.0: reg 20: [io 0x1020-0x103f] [ 0.552350] pci 0000:02:06.0: reg 24: [mem 0xa0004400-0xa00047ff] [ 0.552389] pci 0000:02:06.0: reg 30: [mem 0x98000000-0x9801ffff pref] [ 0.552591] pci 0000:02:08.0: [8086:880c] type 0 class 0x000c03 [ 0.552655] pci 0000:02:08.0: reg 10: [mem 0xa0004800-0xa00048ff] [ 0.552899] pci 0000:02:08.0: PME# supported from D0 D3hot [ 0.552984] pci 0000:02:08.1: [8086:880d] type 0 class 0x000c03 [ 0.553048] pci 0000:02:08.1: reg 10: [mem 0xa0004900-0xa00049ff] [ 0.553292] pci 0000:02:08.1: PME# supported from D0 D3hot [ 0.553371] pci 0000:02:08.2: [8086:880e] type 0 class 0x000c03 [ 0.553436] pci 0000:02:08.2: reg 10: [mem 0xa0004a00-0xa0004aff] [ 0.553679] pci 0000:02:08.2: PME# supported from D0 D3hot [ 0.553764] pci 0000:02:08.3: [8086:880f] type 0 class 0x000c03 [ 0.553835] pci 0000:02:08.3: reg 10: [mem 0xa0004b00-0xa0004bff] [ 0.554096] pci 0000:02:08.3: PME# supported from D0 D3hot [ 0.554205] pci 0000:02:0a.0: [8086:8810] type 0 class 0x00ff00 [ 0.554297] pci 0000:02:0a.0: reg 14: [mem 0xa0004c00-0xa0004cff] [ 0.554601] pci 0000:02:0a.1: [8086:8811] type 0 class 0x000700 [ 0.554666] pci 0000:02:0a.1: reg 10: [io 0x1040-0x1047] [ 0.554704] pci 0000:02:0a.1: reg 14: [mem 0xa0004d00-0xa0004d0f] [ 0.554926] pci 0000:02:0a.1: PME# supported from D0 [ 0.555005] pci 0000:02:0a.2: [8086:8812] type 0 class 0x000700 [ 0.555069] pci 0000:02:0a.2: reg 10: [io 0x1048-0x104f] [ 0.555107] pci 0000:02:0a.2: reg 14: [mem 0xa0004d10-0xa0004d1f] [ 0.555388] pci 0000:02:0a.3: [8086:8813] type 0 class 0x000700 [ 0.555452] pci 0000:02:0a.3: reg 10: [io 0x1050-0x1057] [ 0.555490] pci 0000:02:0a.3: reg 14: [mem 0xa0004d20-0xa0004d2f] [ 0.555770] pci 0000:02:0a.4: [8086:8814] type 0 class 0x000700 [ 0.555834] pci 0000:02:0a.4: reg 10: [io 0x1058-0x105f] [ 0.555872] pci 0000:02:0a.4: reg 14: [mem 0xa0004d30-0xa0004d3f] [ 0.556179] pci 0000:02:0c.0: [8086:8815] type 0 class 0x00ff00 [ 0.556272] pci 0000:02:0c.0: reg 14: [mem 0xa0004e00-0xa0004eff] [ 0.556577] pci 0000:02:0c.1: [8086:8816] type 0 class 0x000c80 [ 0.556663] pci 0000:02:0c.1: reg 14: [mem 0xa0004f00-0xa0004f1f] [ 0.556943] pci 0000:02:0c.2: [8086:8817] type 0 class 0x000c80 [ 0.557029] pci 0000:02:0c.2: reg 14: [mem 0xa0005000-0xa00050ff] [ 0.557310] pci 0000:02:0c.3: [8086:8818] type 0 class 0x000c09 [ 0.557396] pci 0000:02:0c.3: reg 14: [mem 0xa0005200-0xa00053ff] [ 0.557677] pci 0000:02:0c.4: [8086:8819] type 0 class 0x00ff00 [ 0.557763] pci 0000:02:0c.4: reg 14: [mem 0xa0005400-0xa00054ff] [ 0.558091] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 0.560024] pci 0000:01:00.0: bridge window [io 0x1000-0x1fff] [ 0.560045] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xa0ffffff] [ 0.560202] pci 0000:03:00.0: [111d:803a] type 1 class 0x000604 [ 0.560377] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.560418] pci 0000:00:18.0: PCI bridge to [bus 03-07] [ 0.570016] pci 0000:00:18.0: bridge window [io 0x2000-0x3fff] [ 0.570036] pci 0000:00:18.0: bridge window [mem 0xa1000000-0xa3ffffff] [ 0.570175] pci 0000:04:02.0: [111d:803a] type 1 class 0x000604 [ 0.580126] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 0.580204] pci 0000:04:03.0: [111d:803a] type 1 class 0x000604 [ 0.580402] pci 0000:04:03.0: PME# supported from D0 D3hot D3cold [ 0.580484] pci 0000:04:04.0: [111d:803a] type 1 class 0x000604 [ 0.580682] pci 0000:04:04.0: PME# supported from D0 D3hot D3cold [ 0.580802] pci 0000:03:00.0: PCI bridge to [bus 04-07] [ 0.590024] pci 0000:03:00.0: bridge window [io 0x2000-0x3fff] [ 0.590045] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa3ffffff] [ 0.590225] pci 0000:05:00.0: [8086:10d3] type 0 class 0x000200 [ 0.590280] pci 0000:05:00.0: reg 10: [mem 0xa1000000-0xa101ffff] [ 0.590351] pci 0000:05:00.0: reg 18: [io 0x2000-0x201f] [ 0.590394] pci 0000:05:00.0: reg 1c: [mem 0xa1020000-0xa1023fff] [ 0.590654] pci 0000:05:00.0: PME# supported from D0 D3hot [ 0.590719] pci 0000:04:02.0: PCI bridge to [bus 05-05] [ 0.600023] pci 0000:04:02.0: bridge window [io 0x2000-0x2fff] [ 0.600044] pci 0000:04:02.0: bridge window [mem 0xa1000000-0xa1ffffff] [ 0.600229] pci 0000:06:00.0: [8086:10d3] type 0 class 0x000200 [ 0.600283] pci 0000:06:00.0: reg 10: [mem 0xa2000000-0xa201ffff] [ 0.600354] pci 0000:06:00.0: reg 18: [io 0x3000-0x301f] [ 0.600397] pci 0000:06:00.0: reg 1c: [mem 0xa2020000-0xa2023fff] [ 0.600657] pci 0000:06:00.0: PME# supported from D0 D3hot [ 0.600722] pci 0000:04:03.0: PCI bridge to [bus 06-06] [ 0.610023] pci 0000:04:03.0: bridge window [io 0x3000-0x3fff] [ 0.610044] pci 0000:04:03.0: bridge window [mem 0xa2000000-0xa2ffffff] [ 0.610228] pci 0000:07:00.0: [8086:4229] type 0 class 0x000280 [ 0.610299] pci 0000:07:00.0: reg 10: [mem 0xa3000000-0xa3001fff 64bit] [ 0.610593] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.610650] pci 0000:04:04.0: PCI bridge to [bus 07-07] [ 0.620029] pci 0000:04:04.0: bridge window [mem 0xa3000000-0xa3ffffff] [ 0.620221] pci 0000:08:00.0: [111d:803a] type 1 class 0x000604 [ 0.620396] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.620437] pci 0000:00:19.0: PCI bridge to [bus 08-0c] [ 0.630016] pci 0000:00:19.0: bridge window [io 0x4000-0x5fff] [ 0.630036] pci 0000:00:19.0: bridge window [mem 0xa4000000-0xa5ffffff] [ 0.630180] pci 0000:09:02.0: [111d:803a] type 1 class 0x000604 [ 0.630379] pci 0000:09:02.0: PME# supported from D0 D3hot D3cold [ 0.630457] pci 0000:09:03.0: [111d:803a] type 1 class 0x000604 [ 0.630654] pci 0000:09:03.0: PME# supported from D0 D3hot D3cold [ 0.630730] pci 0000:09:04.0: [111d:803a] type 1 class 0x000604 [ 0.630928] pci 0000:09:04.0: PME# supported from D0 D3hot D3cold [ 0.631047] pci 0000:08:00.0: PCI bridge to [bus 09-0c] [ 0.640024] pci 0000:08:00.0: bridge window [io 0x4000-0x5fff] [ 0.640045] pci 0000:08:00.0: bridge window [mem 0xa4000000-0xa5ffffff] [ 0.640231] pci 0000:0a:00.0: [8086:10d3] type 0 class 0x000200 [ 0.640285] pci 0000:0a:00.0: reg 10: [mem 0xa4000000-0xa401ffff] [ 0.640356] pci 0000:0a:00.0: reg 18: [io 0x4000-0x401f] [ 0.640399] pci 0000:0a:00.0: reg 1c: [mem 0xa4020000-0xa4023fff] [ 0.640660] pci 0000:0a:00.0: PME# supported from D0 D3hot [ 0.640725] pci 0000:09:02.0: PCI bridge to [bus 0a-0a] [ 0.650023] pci 0000:09:02.0: bridge window [io 0x4000-0x4fff] [ 0.650044] pci 0000:09:02.0: bridge window [mem 0xa4000000-0xa4ffffff] [ 0.650229] pci 0000:0b:00.0: [8086:10d3] type 0 class 0x000200 [ 0.650284] pci 0000:0b:00.0: reg 10: [mem 0xa5000000-0xa501ffff] [ 0.650355] pci 0000:0b:00.0: reg 18: [io 0x5000-0x501f] [ 0.650398] pci 0000:0b:00.0: reg 1c: [mem 0xa5020000-0xa5023fff] [ 0.650658] pci 0000:0b:00.0: PME# supported from D0 D3hot [ 0.650722] pci 0000:09:03.0: PCI bridge to [bus 0b-0b] [ 0.660023] pci 0000:09:03.0: bridge window [io 0x5000-0x5fff] [ 0.660044] pci 0000:09:03.0: bridge window [mem 0xa5000000-0xa5ffffff] [ 0.660177] pci 0000:09:04.0: PCI bridge to [bus 0c-0c] [ 0.670174] pci 0000:00:1a.0: PCI bridge to [bus 0d-0d] [ 0.694688] pci 0000:00:1f.0: default IRQ router [8086:8186] [ 0.700082] PCI: pci_cache_line_size set to 64 bytes [ 0.700574] reserve RAM buffer: 000000000009b000 - 000000000009ffff [ 0.700590] reserve RAM buffer: 000000003ffe0000 - 000000003fffffff [ 0.701611] pnp: PnP ACPI: disabled [ 0.712067] pci 0000:02:00.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref] [ 0.720033] pci 0000:02:06.0: no compatible bridge window for [mem 0x98000000-0x9801ffff pref] [ 0.730058] PCI: max bus depth: 3 pci_try_num: 4 [ 0.730298] pci 0000:00:17.0: BAR 9: assigned [mem 0x80000000-0x801fffff pref] [ 0.740018] pci 0000:01:00.0: BAR 9: assigned [mem 0x80000000-0x800fffff pref] [ 0.750014] pci 0000:01:00.0: BAR 6: assigned [mem 0x80100000-0x8010ffff pref] [ 0.760029] pci 0000:02:00.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.770014] pci 0000:02:06.0: BAR 6: assigned [mem 0x80020000-0x8003ffff pref] [ 0.780013] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 0.790014] pci 0000:01:00.0: bridge window [io 0x1000-0x1fff] [ 0.800020] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xa0ffffff] [ 0.810017] pci 0000:01:00.0: bridge window [mem 0x80000000-0x800fffff pref] [ 0.820021] pci 0000:00:17.0: PCI bridge to [bus 01-02] [ 0.830012] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff] [ 0.840017] pci 0000:00:17.0: bridge window [mem 0xa0000000-0xa0ffffff] [ 0.850015] pci 0000:00:17.0: bridge window [mem 0x80000000-0x801fffff pref] [ 0.860022] pci 0000:04:02.0: PCI bridge to [bus 05-05] [ 0.870013] pci 0000:04:02.0: bridge window [io 0x2000-0x2fff] [ 0.880019] pci 0000:04:02.0: bridge window [mem 0xa1000000-0xa1ffffff] [ 0.890028] pci 0000:04:03.0: PCI bridge to [bus 06-06] [ 0.900013] pci 0000:04:03.0: bridge window [io 0x3000-0x3fff] [ 0.910018] pci 0000:04:03.0: bridge window [mem 0xa2000000-0xa2ffffff] [ 0.920027] pci 0000:04:04.0: PCI bridge to [bus 07-07] [ 0.930019] pci 0000:04:04.0: bridge window [mem 0xa3000000-0xa3ffffff] [ 0.940026] pci 0000:03:00.0: PCI bridge to [bus 04-07] [ 0.950013] pci 0000:03:00.0: bridge window [io 0x2000-0x3fff] [ 0.960019] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa3ffffff] [ 0.970027] pci 0000:00:18.0: PCI bridge to [bus 03-07] [ 0.980012] pci 0000:00:18.0: bridge window [io 0x2000-0x3fff] [ 0.990017] pci 0000:00:18.0: bridge window [mem 0xa1000000-0xa3ffffff] [ 1.000026] pci 0000:09:02.0: PCI bridge to [bus 0a-0a] [ 1.010013] pci 0000:09:02.0: bridge window [io 0x4000-0x4fff] [ 1.020019] pci 0000:09:02.0: bridge window [mem 0xa4000000-0xa4ffffff] [ 1.030027] pci 0000:09:03.0: PCI bridge to [bus 0b-0b] [ 1.040013] pci 0000:09:03.0: bridge window [io 0x5000-0x5fff] [ 1.050019] pci 0000:09:03.0: bridge window [mem 0xa5000000-0xa5ffffff] [ 1.060027] pci 0000:09:04.0: PCI bridge to [bus 0c-0c] [ 1.070035] pci 0000:08:00.0: PCI bridge to [bus 09-0c] [ 1.080013] pci 0000:08:00.0: bridge window [io 0x4000-0x5fff] [ 1.090019] pci 0000:08:00.0: bridge window [mem 0xa4000000-0xa5ffffff] [ 1.100027] pci 0000:00:19.0: PCI bridge to [bus 08-0c] [ 1.110013] pci 0000:00:19.0: bridge window [io 0x4000-0x5fff] [ 1.120017] pci 0000:00:19.0: bridge window [mem 0xa4000000-0xa5ffffff] [ 1.130022] pci 0000:00:1a.0: PCI bridge to [bus 0d-0d] [ 1.140063] pci 0000:00:17.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.150035] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 1.160010] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.170033] pci 0000:00:18.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 1.180078] pci 0000:00:19.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 1.190078] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 19 [ 1.200017] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 1.200034] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 1.200051] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 1.200067] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa0ffffff] [ 1.200084] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff pref] [ 1.200101] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.200117] pci_bus 0000:02: resource 1 [mem 0xa0000000-0xa0ffffff] [ 1.200134] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref] [ 1.200152] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff] [ 1.200168] pci_bus 0000:03: resource 1 [mem 0xa1000000-0xa3ffffff] [ 1.200185] pci_bus 0000:04: resource 0 [io 0x2000-0x3fff] [ 1.200201] pci_bus 0000:04: resource 1 [mem 0xa1000000-0xa3ffffff] [ 1.200217] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 1.200233] pci_bus 0000:05: resource 1 [mem 0xa1000000-0xa1ffffff] [ 1.200250] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff] [ 1.200266] pci_bus 0000:06: resource 1 [mem 0xa2000000-0xa2ffffff] [ 1.200283] pci_bus 0000:07: resource 1 [mem 0xa3000000-0xa3ffffff] [ 1.200300] pci_bus 0000:08: resource 0 [io 0x4000-0x5fff] [ 1.200316] pci_bus 0000:08: resource 1 [mem 0xa4000000-0xa5ffffff] [ 1.200332] pci_bus 0000:09: resource 0 [io 0x4000-0x5fff] [ 1.200348] pci_bus 0000:09: resource 1 [mem 0xa4000000-0xa5ffffff] [ 1.200365] pci_bus 0000:0a: resource 0 [io 0x4000-0x4fff] [ 1.200381] pci_bus 0000:0a: resource 1 [mem 0xa4000000-0xa4ffffff] [ 1.200397] pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff] [ 1.200413] pci_bus 0000:0b: resource 1 [mem 0xa5000000-0xa5ffffff] [ 1.200518] NET: Registered protocol family 2 [ 1.210145] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.220306] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.232542] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 1.240652] TCP: Hash tables configured (established 131072 bind 65536) [ 1.250008] TCP reno registered [ 1.260019] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 1.270033] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 1.280264] NET: Registered protocol family 1 [ 1.290179] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.300013] pci 0000:02:02.0: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.310119] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.320012] pci 0000:02:02.1: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.330088] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.340011] pci 0000:02:02.2: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.350080] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.360011] pci 0000:02:02.3: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.370631] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 1.380011] pci 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.390079] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 1.400011] pci 0000:02:08.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.410077] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 1.420011] pci 0000:02:08.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.430078] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 1.440011] pci 0000:02:08.3: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.460022] PCI: CLS 32 bytes, default 64 [ 1.460538] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.470334] scx200: NatSemi SCx200 Driver [ 1.482009] highmem bounce pool size: 64 pages [ 1.510255] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.520012] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 1.530853] msgmni has been set to 1750 [ 1.540045] io scheduler noop registered [ 1.550009] io scheduler deadline registered (default) [ 1.560095] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 1.570013] pch_gpio 0000:02:00.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.580051] gpiochip_add: registered GPIOs 244 to 255 on device: 0000:02:00.2 [ 1.601907] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.610304] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a TI16750 [ 1.630278] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.640013] serial 0000:02:0a.1: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.660018] 0000:02:0a.1: ttyS1 at I/O 0x1040 (irq = 19) is a 16550A [ 1.670248] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.680012] serial 0000:02:0a.2: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.690083] Couldn't register serial port 0000:02:0a.2: -28 [ 1.700063] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.710011] serial 0000:02:0a.3: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.720081] Couldn't register serial port 0000:02:0a.3: -28 [ 1.730079] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 1.740011] serial 0000:02:0a.4: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 1.750081] Couldn't register serial port 0000:02:0a.4: -28 [ 1.760886] Non-volatile memory driver v1.3 [ 1.770162] ACPI Exception: AE_BAD_PARAMETER, Thread 4135796736 could not acquire Mutex [0x1] (20120111/utmutex-276) [ 1.800187] ACPI Exception: AE_BAD_PARAMETER, Thread 4135796736 could not acquire Mutex [0x1] (20120111/utmutex-276) [ 1.830186] gpiochip_add: registered GPIOs 0 to 4 on device: sch_gpio_core [ 1.840012] gpiochip_add: registered GPIOs 5 to 13 on device: sch_gpio_resume [ 1.850022] ACPI Exception: AE_BAD_PARAMETER, Thread 4135796736 could not acquire Mutex [0x1] (20120111/utmutex-276) [ 1.880752] ahci 0000:02:06.0: version 3.0 [ 1.880796] pci 0000:01:00.0: using bridge 0000:00:17.0 INT B to get IRQ 17 [ 1.890012] ahci 0000:02:06.0: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 1.900133] ahci 0000:02:06.0: irq 40 for MSI/MSI-X [ 1.900235] ahci: SSS flag set, parallel bus scan disabled [ 1.910091] ahci 0000:02:06.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.920016] ahci 0000:02:06.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 1.930017] ahci 0000:02:06.0: setting latency timer to 64 [ 1.931661] scsi0 : ahci [ 1.940533] scsi1 : ahci [ 1.950467] ata1: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004500 irq 40 [ 1.960016] ata2: SATA max UDMA/133 abar m1024@0xa0004400 port 0xa0004580 irq 40 [ 2.320050] ata1: SATA link down (SStatus 0 SControl 300) [ 2.470025] Switching to clocksource tsc [ 2.678314] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.708749] ata2.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133 [ 2.725687] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.758649] ata2.00: configured for UDMA/133 [ 2.771711] scsi 1:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5 [ 2.796790] sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 2.820157] sd 1:0:0:0: [sda] Write Protect is off [ 2.834503] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.834624] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.864500] sda: sda1 sda2 [ 2.874188] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.888360] Creating 1 MTD partitions on "rootfs": [ 2.902701] 0x000000000000-0x000004070000 : "rootfs" [ 2.918544] mtd: partition "rootfs" set to be root filesystem [ 2.937737] mtd: partition "rootfs_data" created automatically, ofs=160000, len=3F10000 [ 2.961959] 0x000000160000-0x000004070000 : "rootfs_data" [ 2.979089] block2mtd: mtd0: [rootfs] erase_size = 64KiB [65536] [ 2.997305] pci 0000:01:00.0: using bridge 0000:00:17.0 INT C to get IRQ 18 [ 3.018145] pch_spi 0000:02:0c.1: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 3.039168] pch-spi pch-spi.0: Use DMA for data transfers [ 3.056022] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 3.075073] rtc0: alarms up to one day, 114 bytes nvram [ 3.091065] cpuidle: using governor ladder [ 3.103515] TCP cubic registered [ 3.113172] NET: Registered protocol family 17 [ 3.126528] 8021q: 802.1Q VLAN Support v1.8 [ 3.139081] Using IPI Shortcut mode [ 3.151659] rtc_cmos rtc_cmos: setting system clock to 2012-10-01 14:51:02 UTC (1349103062) [ 3.180708] VFS: Mounted root (squashfs filesystem) readonly on device 31:0. [ 3.201921] Freeing unused kernel memory: 212k freed [ 7.388817] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 8.067202] usbcore: registered new interface driver usbfs [ 8.083727] usbcore: registered new interface driver hub [ 8.101159] usbcore: registered new device driver usb [ 8.126043] PPP generic driver version 2.4.2 [ 8.161116] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.226041] NET: Registered protocol family 24 [ 8.245060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.264682] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 8.285516] ehci_hcd 0000:02:02.3: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 8.306393] ehci_hcd 0000:02:02.3: setting latency timer to 64 [ 8.306412] ehci_hcd 0000:02:02.3: EHCI Host Controller [ 8.322114] ehci_hcd 0000:02:02.3: new USB bus registered, assigned bus number 1 [ 8.368410] ehci_hcd 0000:02:02.3: cache line size of 32 is not supported [ 8.368452] ehci_hcd 0000:02:02.3: irq 19, io mem 0xa0000e00 [ 8.398401] ehci_hcd 0000:02:02.3: USB 2.0 started, EHCI 1.00 [ 8.416054] hub 1-0:1.0: USB hub found [ 8.427282] hub 1-0:1.0: 3 ports detected [ 8.439487] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 8.460318] ehci_hcd 0000:02:08.3: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 8.481182] ehci_hcd 0000:02:08.3: setting latency timer to 64 [ 8.481200] ehci_hcd 0000:02:08.3: EHCI Host Controller [ 8.496849] ehci_hcd 0000:02:08.3: new USB bus registered, assigned bus number 2 [ 8.548416] ehci_hcd 0000:02:08.3: cache line size of 32 is not supported [ 8.548454] ehci_hcd 0000:02:08.3: irq 16, io mem 0xa0004b00 [ 8.578458] ehci_hcd 0000:02:08.3: USB 2.0 started, EHCI 1.00 [ 8.596097] hub 2-0:1.0: USB hub found [ 8.607311] hub 2-0:1.0: 3 ports detected [ 8.627395] nf_conntrack version 0.5.0 (16181 buckets, 64724 max) [ 8.729451] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 8.746927] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 8.764730] e1000e 0000:05:00.0: Disabling ASPM L0s [ 8.779632] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT C to get IRQ 19 [ 8.801754] e1000e 0000:05:00.0: PCI->APIC IRQ transform: INT C -> IRQ 19 [ 8.822538] e1000e 0000:05:00.0: irq 41 for MSI/MSI-X [ 8.822565] e1000e 0000:05:00.0: irq 42 for MSI/MSI-X [ 8.822588] e1000e 0000:05:00.0: irq 43 for MSI/MSI-X [ 8.838403] Clocksource tsc unstable (delta = 161376495 ns) [ 8.855178] Switching to clocksource jiffies [ 8.991879] e1000e 0000:05:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff [ 8.997963] e1000e 0000:05:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9.008045] e1000e 0000:05:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 9.017985] e1000e 0000:06:00.0: Disabling ASPM L0s [ 9.028009] pcieport 0000:03:00.0: using bridge 0000:00:18.0 INT D to get IRQ 16 [ 9.037960] e1000e 0000:06:00.0: PCI->APIC IRQ transform: INT D -> IRQ 16 [ 9.048423] e1000e 0000:06:00.0: irq 44 for MSI/MSI-X [ 9.048448] e1000e 0000:06:00.0: irq 45 for MSI/MSI-X [ 9.048472] e1000e 0000:06:00.0: irq 46 for MSI/MSI-X [ 9.213626] e1000e 0000:06:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff [ 9.217964] e1000e 0000:06:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 9.228046] e1000e 0000:06:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 9.237993] e1000e 0000:0a:00.0: Disabling ASPM L0s [ 9.248007] pcieport 0000:08:00.0: using bridge 0000:00:19.0 INT C to get IRQ 16 [ 9.257961] e1000e 0000:0a:00.0: PCI->APIC IRQ transform: INT C -> IRQ 16 [ 9.268416] e1000e 0000:0a:00.0: irq 47 for MSI/MSI-X [ 9.268442] e1000e 0000:0a:00.0: irq 48 for MSI/MSI-X [ 9.268467] e1000e 0000:0a:00.0: irq 49 for MSI/MSI-X [ 9.433644] e1000e 0000:0a:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff [ 9.437963] e1000e 0000:0a:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 9.448045] e1000e 0000:0a:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 9.457984] e1000e 0000:0b:00.0: Disabling ASPM L0s [ 9.468007] pcieport 0000:08:00.0: using bridge 0000:00:19.0 INT D to get IRQ 17 [ 9.477960] e1000e 0000:0b:00.0: PCI->APIC IRQ transform: INT D -> IRQ 17 [ 9.488421] e1000e 0000:0b:00.0: irq 50 for MSI/MSI-X [ 9.488447] e1000e 0000:0b:00.0: irq 51 for MSI/MSI-X [ 9.488472] e1000e 0000:0b:00.0: irq 52 for MSI/MSI-X [ 9.653644] e1000e 0000:0b:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:00:24:ff:ff:ff [ 9.657963] e1000e 0000:0b:00.0: eth3: Intel(R) PRO/1000 Network Connection [ 9.668045] e1000e 0000:0b:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 9.684389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.688051] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 9.697964] ohci_hcd 0000:02:02.0: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 9.708020] ohci_hcd 0000:02:02.0: setting latency timer to 64 [ 9.708038] ohci_hcd 0000:02:02.0: OHCI Host Controller [ 9.718005] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 3 [ 9.728010] ohci_hcd 0000:02:02.0: irq 19, io mem 0xa0000b00 [ 9.802487] hub 3-0:1.0: USB hub found [ 9.807978] hub 3-0:1.0: 1 port detected [ 9.818163] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 9.827962] ohci_hcd 0000:02:02.1: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 9.838009] ohci_hcd 0000:02:02.1: setting latency timer to 64 [ 9.838027] ohci_hcd 0000:02:02.1: OHCI Host Controller [ 9.847992] ohci_hcd 0000:02:02.1: new USB bus registered, assigned bus number 4 [ 9.858003] ohci_hcd 0000:02:02.1: irq 19, io mem 0xa0000c00 [ 9.932442] hub 4-0:1.0: USB hub found [ 9.937978] hub 4-0:1.0: 1 port detected [ 9.948179] pci 0000:01:00.0: using bridge 0000:00:17.0 INT D to get IRQ 19 [ 9.957963] ohci_hcd 0000:02:02.2: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 9.968014] ohci_hcd 0000:02:02.2: setting latency timer to 64 [ 9.968032] ohci_hcd 0000:02:02.2: OHCI Host Controller [ 9.977993] ohci_hcd 0000:02:02.2: new USB bus registered, assigned bus number 5 [ 9.988005] ohci_hcd 0000:02:02.2: irq 19, io mem 0xa0000d00 [ 10.062420] hub 5-0:1.0: USB hub found [ 10.067977] hub 5-0:1.0: 1 port detected [ 10.078154] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 10.087962] ohci_hcd 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 10.098011] ohci_hcd 0000:02:08.0: setting latency timer to 64 [ 10.098028] ohci_hcd 0000:02:08.0: OHCI Host Controller [ 10.107993] ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 6 [ 10.118010] ohci_hcd 0000:02:08.0: irq 16, io mem 0xa0004800 [ 10.192422] hub 6-0:1.0: USB hub found [ 10.197978] hub 6-0:1.0: 1 port detected [ 10.208141] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 10.217963] ohci_hcd 0000:02:08.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 10.228011] ohci_hcd 0000:02:08.1: setting latency timer to 64 [ 10.228030] ohci_hcd 0000:02:08.1: OHCI Host Controller [ 10.237992] ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 7 [ 10.248005] ohci_hcd 0000:02:08.1: irq 16, io mem 0xa0004900 [ 10.322428] hub 7-0:1.0: USB hub found [ 10.327977] hub 7-0:1.0: 1 port detected [ 10.338152] pci 0000:01:00.0: using bridge 0000:00:17.0 INT A to get IRQ 16 [ 10.347962] ohci_hcd 0000:02:08.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 10.358019] ohci_hcd 0000:02:08.2: setting latency timer to 64 [ 10.358037] ohci_hcd 0000:02:08.2: OHCI Host Controller [ 10.367993] ohci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 8 [ 10.378005] ohci_hcd 0000:02:08.2: irq 16, io mem 0xa0004a00 [ 10.452429] hub 8-0:1.0: USB hub found [ 10.457977] hub 8-0:1.0: 1 port detected [ 10.482416] uhci_hcd: USB Universal Host Controller Interface driver [ 12.889774] 8021q: adding VLAN 0 to HW filter on device eth0 [ 12.898907] device eth0 entered promiscuous mode [ 15.989314] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.009266] br-lan: port 1(eth0) entered forwarding state [ 16.027996] br-lan: port 1(eth0) entered forwarding state [ 18.027966] br-lan: port 1(eth0) entered forwarding state [ 19.611763] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 19.618319] jffs2_build_filesystem(): unlocking the mtd device... done. [ 19.629786] jffs2_build_filesystem(): erasing all blocks after the end marker... done. [ 28.043709] JFFS2 notice: (1071) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 2423.738143] e1000e: eth0 NIC Link is Down [ 2423.749186] br-lan: port 1(eth0) entered disabled state [ 6208.589070] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 6208.599261] br-lan: port 1(eth0) entered forwarding state [ 6208.607983] br-lan: port 1(eth0) entered forwarding state [ 6210.607966] br-lan: port 1(eth0) entered forwarding state


Basic configuration

Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.

Specific Configuration

Interfaces

Work in progress

The default network configuration is:

Interface Name Description Default configuration
br-lan LAN & WiFi 192.168.1.1/24
vlan0 (eth0.0) LAN ports (1 to 4) None
vlan1 (eth0.1) WAN port DHCP
wl0 WiFi Disabled

Switch Ports (for VLANs)

Work in progress

Numbers 0-3 are Ports 1-4 as labeled on the unit, number 4 is the Internet (WAN) on the unit, 5 is the internal connection to the router itself. Don't be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on.

Port Switch port
Internet (WAN) 4
LAN 1 3
LAN 2 2
LAN 3 1
LAN 4 0

Failsafe mode

Buttons

The hardware reset button does what you would expect.

Hardware

Info

Architecture: x86
Vendor: Intel
Bootloader: GRUB legacy (grub2 does not work?)
System-On-Chip: Intel Atom E6xx single chip processor with EG20T companion chip
CPU/Speed 500MHz to 1.6GHz
Flash-Chip: None
BIOS/BOOT size: 8192 KiB
RAM: 512MB to 1.5GB
Wireless: None (miniPCIe slot)
Ethernet: 4x Intel 82574L Gigabit Ethernet
Internet: n/a
USB: Yes, bootable, 3 x 2.0 (two internal, one external)
Serial: Yes, two internal, one external (DB9)
JTAG: ???

Photos

The vendor has photos online at http://soekris.com/products/net6501.html.

Serial

port.serial general information about the serial port, serial port cable, etc.

Tags

toh/soekris/net6501.txt · Last modified: 2015/12/14 20:28 by tmomas